Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ViewSonic LCD Monitor VS11826 blown part

Status
Not open for further replies.

abuhafss

Full Member level 2
Full Member level 2
Joined
Aug 8, 2010
Messages
142
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,383
Hi

The other day, my LCD monitor suddenly made a small bang and then went off.

After opening it, I found that a component is blown. The markings are no more available. It's a 6-lead component in TO-220 package.

I tried to google for the service manual for VS11826 but could not find one. Can anybody help me identifying the part. Some photos are attached for reference.

Thanks
 

Attachments

  • 20131226_234121.jpg
    20131226_234121.jpg
    161.4 KB · Views: 145
  • 20131226_234331.jpg
    20131226_234331.jpg
    702.6 KB · Views: 144
  • 20131226_233833.jpg
    20131226_233833.jpg
    406 KB · Views: 164

try this

https://www.eserviceinfo.com/index.php?what=search2&searchstring=+Viewsonic+vs11826

Hi

The other day, my LCD monitor suddenly made a small bang and then went off.

After opening it, I found that a component is blown. The markings are no more available. It's a 6-lead component in TO-220 package.

I tried to google for the service manual for VS11826 but could not find one. Can anybody help me identifying the part. Some photos are attached for reference.

Thanks
 

I had checked that before, service manual for VS11826 is not available.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top