filtershaoyong
Member level 1
verilog-a
I use the kundert's VCO modeling and find some problen when do simulation in Hspice.
The problems: the VCO works well under 10uS, but the output is wrong when tran simulation larger than 10uS.
I don't know what's wrong?
you can get the result use attachment hspice netlist.
Thanks,
I use the kundert's VCO modeling and find some problen when do simulation in Hspice.
The problems: the VCO works well under 10uS, but the output is wrong when tran simulation larger than 10uS.
I don't know what's wrong?
you can get the result use attachment hspice netlist.
Thanks,