Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Using 8051 for making a PLC

Status
Not open for further replies.
8051 plc hobby

me also ,must say the microcontroller which has used in siemens s5 series is original 8031 from intel.

regards
 

pic ladder firmware

Medtronic said:
me also ,must say the microcontroller which has used in siemens s5 series is original 8031 from intel.

regards

I can develop both H/W and S/w for the 8051 based PLC. pl. contact me with detail requirements : blchand@hotmail.com
 

Re: 8051 based PLC

Update,

Go to https://www.cq.cx/ladder.pl, open source PLC for PIC and AVR, now maybe 8051 too -- look in the Forum. Couple of uploads which may work with Amtel 8051's. Like other members thoughts.
 
Re: 8051 based PLC

For https://www.cq.cx/ladder.pl described should not be used for serious purposes, while laderrwork seems much more serious program, if anyone knows how to use an external keyboard to set timers to let him ladderwork please describe.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top