MikhailBY
Newbie level 4
- generator with an output impedance of 50 ohms
- chip with an input impedance of 1000 ohms (at 100 MHz)
- microstrip line on PCB, and its S-parameters in ***.S2D file
why? simulation in ADS gives mag(S21) = 0.424 (and not seek to 1)
for example, harmonic balance and transient analysis give results, in which no reflections...
- chip with an input impedance of 1000 ohms (at 100 MHz)
- microstrip line on PCB, and its S-parameters in ***.S2D file
why? simulation in ADS gives mag(S21) = 0.424 (and not seek to 1)
for example, harmonic balance and transient analysis give results, in which no reflections...