niks
Full Member level 3
p fet basics
hello,
I am shorting GATE and SOURCE of P-FET and connected to VCC. And Drain is connected to ground. Pupose of this circuit is when if supply is not there then i would like to ground the VCC pin.
1. Is it required to connect pull down at FET gate?
2. If i do not connect pull down whether FET will be ON when VCC = off?
niks
hello,
I am shorting GATE and SOURCE of P-FET and connected to VCC. And Drain is connected to ground. Pupose of this circuit is when if supply is not there then i would like to ground the VCC pin.
1. Is it required to connect pull down at FET gate?
2. If i do not connect pull down whether FET will be ON when VCC = off?
niks