Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

TSMC 2p4m 0.35um process via MOSIS

Status
Not open for further replies.

upvl

Junior Member level 3
Junior Member level 3
Joined
Mar 12, 2010
Messages
28
Helped
8
Reputation
16
Reaction score
6
Trophy points
1,283
Location
US
Activity points
1,455
We're going to tape out in TSMC 2p4m 0.35 um process through MOSIS. May I know if anyone has experience in this process with MOSIS? If so, when you designed the circuitry, did you use the third-party PDK (NCSU PDK, for example) or the PDK from TSMC?

Thanks,
upvl
 

Usually 3rd party related stuff are NOT to be discussed owing to IP infringement/Copyright. For all these questions, I would recommend contacting directly the concerned firm.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top