Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

tlc7135 ADC pc interfacing

Status
Not open for further replies.

Uzair

Newbie level 1
Newbie level 1
Joined
Nov 2, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
adc + pc

Hi everyone
I have an adc with tlc7135 and at89c52. I need to take serial data out of it. but a chip with rx and tx pin is missing from the circuit. it is a dip16. can anyone has this circuit or any idea what this chip is. can i take serial data directly from tlc7135. Please suggest. thanks
uzair
 

tlc7135

TLC7135 is a ADC specifically designed to drive a LCD or LED display and that is how its outputs are configured as mentioned in the datasheet. So if u want to use it you can use it as a parallel input device to the PC using the Parallel port. If u want to stick with a serial ADC I think you could look into AD7890 (Datasheet Attached)
 

you can read BCD value by your mcu and send it to serial port
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top