Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Tips on RF designing for beginners

Status
Not open for further replies.

liberal

Advanced Member level 4
Full Member level 1
Joined
Nov 25, 2004
Messages
105
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
828
RF!!! i am puzzled!!!

I am in an institute,a new institute,the RF power is weak.now we buy modules then build the system.I don't know if i can learn more from doing this work?i am new in RF .can u give me some advice??i am puzzled.Thank you.
 

RF!!! i am puzzled!!!

I think first you should learn something about Electronic
field and wave, then choose a suitable RF text book to read.
best wishes.
 

Re: RF!!! i am puzzled!!!

Hi,
This is a structured approach - the first thing is to be very conversant in linear integrated circuit design - then you move to non-linear circuit design - understandbly your problem is that you are doing a lot of dog work - but the fact that you are putting things together gives you a great opportunity in practicing engineering of matched networks and systems engineering - when you work on designing yourself you will be buying Intellectual properties most of the time and putting them together - that is the trend in the industry - design effort for projects starting from scratch is only about 25% - so master the art of matching networks and you are already half done -
Good Luck
ag

Added after 1 minutes:

Hi again,
by the way try out this site -
https://www.radio-electronics.com/

ag
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top