Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] the power supplied to the circuit

Status
Not open for further replies.
Please note that the category Electronic Elementary Questions is dedicated for homework help.

Start with finding the node voltages caused by the two sources.
 
1W, 12W by voltage source and current source respectively.
 

1W, 12W by voltage source and current source respectively.
Click to expand...
You're adding a new erroneous solution to the multiple-choice problem. You can be sure, that one of the four choices is correct!
 

correction: the answer is -3W, 16W by the voltage source and the current source respectively.
 
  • Like
Reactions: rk433

    R

    rk433

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top