Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Testing inductor using LC meter

Status
Not open for further replies.
X

xinz

Junior Member level 1
Joined
Jan 1, 2008
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
inductor test

I planning to make a switching voltage regulator, it's operation freq. is 100Khz.
when testing inductor using LC meter, if I find the inductor work good at 500Khz will it also work good at 100KHz?

I hope someone can give me more info about it
 

Re: inductor test

If an inductor @500kHz passes “test” @500kHz it will also pass the same “test” @100kHz, but not the other way around ..
It should show the same inductance, but may have different Q ..

Rgds,
IanP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top