Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Test the stability of a circuit against EMC

Status
Not open for further replies.

mohammadyou

Member level 4
Member level 4
Joined
Oct 2, 2007
Messages
76
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,785
Test the stability of a circuit against EMI

Hi
I have always worried abut EMI signal and its Effect on my design. what is the best way to examine the behavior of our design?
How the major companies check their design in this term?
Thanks
 
Last edited:

They test it according to standards, to which their devices have to comply to on specific market.
 

They test it according to standards, to which their devices have to comply to on specific market.

Thanks for your reply, What kind of instruments or softwares do they use?
How can I test my design ( for home users ) ?
 

Professional EMC equipment is very expensive...
For home users:
- Test emmision by placing your device close to radio receiver and look for the interference over available frequency bands..
- Test immunity by running electrical drill, hairdryer or something similar, close to Your device and check if it still operates properly under this conditions.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top