Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Tcp client code doesn't work when using cross cable for connection

Status
Not open for further replies.
B

babybird

Newbie level 6
Newbie level 6
Joined
Feb 15, 2003
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
146
I am doing tcp client project using arm proccessor with uclinux.
my tcpclient.c code working when I use switch-hub to connect to server.But can't work when I use cross cable to connect.what do you think about this.
thanks for advic
 

Re: Tcp Client

Are you sure your cross cable is correct? To make sure, use that cable two connect two computer directly.
 

Re: Tcp Client

Yes I am sure.
 

Re: Tcp Client

Connect your device to a computer, and use Ethereal to monitor what happen on the Ethernet bus.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top