varunme
Advanced Member level 3
can we control stepper by using tb6600 by using the below flow code?
the tb6600 board i am using have EN ;CLK ;DIR pins
and M1 M2 M3 and TQ
the tb6600 board i am using have EN ;CLK ;DIR pins
and M1 M2 M3 and TQ
Code:
for (i=0; i<=10; i++)
{
EN =1;
CLK =1;
DIR =1
CLK =0;
EN =0;
EN =1;
CLK =1;
DIR =0;
CLK =0;
EN =0;
}