Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

STI from all four sides

Status
Not open for further replies.

saha.123

Junior Member level 2
Junior Member level 2
Joined
Jul 2, 2015
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
143
Hi

For any gate, Will STI effect come from only left& right side of the corresponding gate or it'll come from both top & bottom sides too??Could anyone explain it in detail

Thanks in advance
 

STI totally surrounds active areas so ... yes, STI effects the gate region from all four sides.
 

You are most concerned about where (active*poly) touches
STI (==!active). If poly rund north / south, the STI at the
east and west ends is not really going to do anything, it's
"stood off" by the S/D implant & contacts away from the
active gate.

"Affects" all four sides, perhaps, if you want to quibble.
But get quantitative and only two will really show anything
significant.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top