Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Specific FFT application - request for resources

Status
Not open for further replies.

jmarkwolf

Junior Member level 3
Junior Member level 3
Joined
Feb 13, 2007
Messages
29
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,503
Specific FFT application

Can someone describe, or point me to literature that describes the specific FFT usage for dynamic balance measurement, such as used on aircraft propeller balancers? Such instruments take low-level signals from an accelerometer and a 1-per-revolution strobe, and report the degree of imbalance in velocity and the phase in degrees.

Techies I've talked to are more familiar with the traditional "spectrum analysis" application of FFT's, but are completely unfamiliar with mechanical vibration FFT application.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top