Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Source for Allegro SLA7062M Stepper Driver?

Status
Not open for further replies.

codesuidae

Newbie level 5
Newbie level 5
Joined
Sep 5, 2004
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
105
sla7062m

Howdy,

I'm looking for a source for the **broken link removed** in singles quantities. **broken link removed**, but they have a 3 month lead time, and require a minimum order of 108 of them at about $8.50 each. I only need 4, and I don't want to wait three months for them.

This is for an existing design, so I need either this part or something pin-compatible.

Sorry if this isn't the best place for this post, I didn't see another forum more suited to this type of request.

Thanks for any leads!
 

sla7062m price

You have 2 options.
1 use a site like partminer.com pricing is sent to you after you RFQ ( request for quote )
2. Call a local sales office of Allegro and ask for some sample to do prototyping.
Give them a line that if the part is accecptable you could purchase like 2K to 10K pieces per year. You should also come up with a nifty sounding Project name.
Preferable have them sent to your work as opposed to a residential address. If you work for a manufacturer you'll be more likely to get free parts. You can still get them but it may require a few lies on your part to get them.

Here's an example:
Hi I'm Joe Blow and My company whosits is developing a new product line of positional robotics. We need to replace a existing product that is reaching end of life. Your Product SLA7062M is one of our prospective replacement parts.
I'd like to get 10 pieces for prototyping and evaluation.
Should your part perform and be accepted for use we would likely purchase 2,000 to 8,000 pieces per year. IF you can provide pricing for lots of 1,000;5,000 and 10,000 or wherever your price breaks occur would be helpfull.
Thanks,

good luck
 

sla7062

I went ahead & purchased qty 108 of the Allegro/Sanken SLA7062 / SLA7062M from Newark and am offering them for sale in single quantities to help promote the hobby. The details are at: www.techkits.com

Happy stepping!

-edison
 

order sla7062m

Thats great, thanks!
 

sla7062m circuits

How do I go about getting some from you?

I'd be wanting say 4, including postage to New Zealand.

You can contact me off-forum at andrew@meccanisms.com (www.meccanisms.com)

thanks
Andrew
Auckland
New Zealand
 

microstep driver sample with sla7062

Great news! I have been able to pass along a price reduction on the SLA7062M unipolar microstepping driver. Now only $10 each & no minimum order. www.techkits.com
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top