srevish
Member level 2
Dear All,
I am working with the sensor which has the voltage step of 0.5mV,
For the 12 bit ADC with the reference voltage of 5 V, it can measure only 1.2mV,
I required the microcontroller with the inbuilt 14 or 16 bit ADC
What can the best solution for this issue, please post your valuable advice.
Thanks in advance.
I am working with the sensor which has the voltage step of 0.5mV,
For the 12 bit ADC with the reference voltage of 5 V, it can measure only 1.2mV,
I required the microcontroller with the inbuilt 14 or 16 bit ADC
What can the best solution for this issue, please post your valuable advice.
Thanks in advance.
Last edited: