Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Solder Mask in Altium

Status
Not open for further replies.
M

maxascent

Member level 2
Joined
Sep 22, 2005
Messages
52
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
England
Activity points
1,631
altium solder mask

Hi

I have a bga device and need to know what the solmask expansion should be set for the fanout vias. I have heard that the vias should be capped with solder mask to prevent solder flowing into them. So should the expansion be set to 0?

Cheers
 

force complete tenting

No, you have to define via padstack without soldermask pads. Use "Force complete tenting"-option in via properties.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top