Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

simulation of ti parts with pspice

Status
Not open for further replies.

whatever125

Newbie level 4
Newbie level 4
Joined
Apr 3, 2013
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,312
I'm trying to simulate a part with TI's CSD25401 everytime I try to run the simulation it says the subcircuit is missing. I have all the files needed for that part in the same folder as my simulation file and it still doesn't work.

I have version 16.0 and this should work but it's not and I'm not sure why.
 

You need to add the lib file in the simulation settings. Do following -
Simulation -> Edit Profile-> Configuration Files (Tab) -> Library (under category). Browse for the lib file and "Add to design".
This should resolve the problem.
 

You need to add the lib file in the simulation settings. Do following -
Simulation -> Edit Profile-> Configuration Files (Tab) -> Library (under category). Browse for the lib file and "Add to design".
This should resolve the problem.

Still didn't work. Same error
 

Ok. Can you share your netlist and lib file.
By looking at netlist , should be easy to figure out root cause of the error.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top