Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

sim300 gsm module simcom ckt diagram

Status
Not open for further replies.

ronydc

Full Member level 3
Full Member level 3
Joined
Nov 17, 2005
Messages
166
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,298
Activity points
2,612
dear friends..
i have purchased sim300z from simcom. -- a GSM Module.

do any one have the functional ckt diagram ..? tht can make me a great help bcs i have no time left for my exam.

i just need a basic ckt diagram ( and not the pin outs) for connecting it to the pc.
--------------------------------------
and secondly,i also want to know that there are 2 serial ports in the module.
one is main and the anotehr is debug. so which one is to be used if the module is to be connected to the microcontroler( 8051 having only TX and rx lines.)

thanks in advance..

-Rony..
 

Hi,

I have a circuit diagram of SIM300C but it is in chinese.
the main COM should be connected to the MAX232-UART port of the micro.

basically, it is a RS232-GSM module. the main connector of SIM300 is connected to your device. the other connector is when you must configure the output/select the GSM band to be used.
 

    V

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top