Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

should i use parabolic antenna by cst or hfss

Status
Not open for further replies.

GaffarEEE

Member level 2
Member level 2
Joined
Jun 18, 2008
Messages
42
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,534
cst+parabola antenna

please help me in making decision
 

hfss parabolic

use cst

Added after 41 seconds:

but cst is more complex in using mesh type parabolic antenna

Added after 37 seconds:

u can also use some other type of software like feko, grasp9
 

    GaffarEEE

    Points: 2
    Helpful Answer Positive Rating
I found more intuitive CST.
I was also the problem placing the ports with hfss. So I prefer CST.
 

    GaffarEEE

    Points: 2
    Helpful Answer Positive Rating
I'm trying to use CST to design and simulate parabolic antenna with its element horn antenna, but I have trouble in my process, because I'm very new in this area. So, may you help me and send me any material about this problem, thanks very much
my email: daominhde@yahoo.com
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top