vimalraj205
Member level 3
Hai friends
i have doubt whether can i set a multicycle path of setup value 0
set_multicycle_path -setup 0 -from xxx -to yyyy -end
will i be able to meet setup and hold for this path if setup is checked at 0 how should i give a multicycle path for a hold check
Thank you
i have doubt whether can i set a multicycle path of setup value 0
set_multicycle_path -setup 0 -from xxx -to yyyy -end
will i be able to meet setup and hold for this path if setup is checked at 0 how should i give a multicycle path for a hold check
Thank you