sidy50
Member level 4
Hi all,
Theres an extremely important help, i need in my project...
Here is what happens to be done...
An ADC0808 converts analog data into 8 bit Digital Data...
Now i want to transmit this Data serially through UART of 8051 & Display this data on anyone of the Ports of the other 8051uC...i have C routines for UART & ADC conversion...
But m not able to make it work properly...The Displayed Data on the Ports is Incorrect.
Pls help me, how can i make this work
Any suggestions or Similar Codes would help...
Thanx & Regards.
Sidy.
Theres an extremely important help, i need in my project...
Here is what happens to be done...
An ADC0808 converts analog data into 8 bit Digital Data...
Now i want to transmit this Data serially through UART of 8051 & Display this data on anyone of the Ports of the other 8051uC...i have C routines for UART & ADC conversion...
But m not able to make it work properly...The Displayed Data on the Ports is Incorrect.
Pls help me, how can i make this work
Any suggestions or Similar Codes would help...
Thanx & Regards.
Sidy.