Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Selecting a TVS diode

Status
Not open for further replies.
D

Delta11

Junior Member level 3
Joined
May 14, 2009
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,454
Guys,
My circuit has an input of 28V and output is 5V. The surges that I am worried about lie in the range of 70-90V as per my customer specification. So this is the idea of specifications for TVS diode I had:
Reverse Stand-Off voltage: 30V
Breakdown Voltage: 35-36V
Max Clamping Voltage : 40 V
Kindly comment on specifications and also recommend a TVS if anybody knows because i couldn't find it.

Thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top