stoyanoff
Full Member level 4
Hi! I want to connect 18F66J60(3.3V Vcc) to SD card.
I want to be sure my chart is OK. So here are the connections:
PIN 1 of the SD card is connected to PIN 33(RC2/CS) of the 18F66J60
PIN 2 ----- --- to PIN 36(RC5/SDO)
PIN 3 ---- --- to GRD
PIN 4 ---- ---- to Vcc
PIN 5 ---- --- to PIN 34(RC3/SCK)
PIN 6 ---- ---- to GRD
PIN 7 ---- ---- to PIN 35(RC4/SDI)
PIN 8 and 9 through pull-up resistor(10k) to Vcc
PINs 1,2,5,7 have pull-up resistors, too.
Is everything OK??
I want to be sure my chart is OK. So here are the connections:
PIN 1 of the SD card is connected to PIN 33(RC2/CS) of the 18F66J60
PIN 2 ----- --- to PIN 36(RC5/SDO)
PIN 3 ---- --- to GRD
PIN 4 ---- ---- to Vcc
PIN 5 ---- --- to PIN 34(RC3/SCK)
PIN 6 ---- ---- to GRD
PIN 7 ---- ---- to PIN 35(RC4/SDI)
PIN 8 and 9 through pull-up resistor(10k) to Vcc
PINs 1,2,5,7 have pull-up resistors, too.
Is everything OK??