Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Rradiation efficiency simulation problem

Status
Not open for further replies.

catalyst101

Member level 1
Member level 1
Joined
Jul 21, 2012
Messages
32
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,497
Dear all,

could anyone tell what is the best EM simulator for calculating radiation efficiency for a microstrip antenna?
I'm simulating a paper using hfss and can't get the proper efficiency.

Regards
 

It is impossible to determine a universal best EM simulator for calculating radiation efficiency. Every simulator has its advantage and shortcoming. By saying "can't get the proper efficiency", how much difference between the HFSS result and the data provided in the paper?
 
The whole behavior is different. Besides the efficiency is 100% for frequencies of worst return loss and low for frequencies of good RL !

Both my simulation and reference are attached.
THANK YOU
 

Attachments

  • paper.png
    paper.png
    164 KB · Views: 102
  • hfss-effeciency.png
    hfss-effeciency.png
    52.2 KB · Views: 108
Try to manually mesh denser the volume around the antenna (i.e., the air around the antenna) and the radiation boundaries as well. HFSS automatically refines the mesh where the electric field is more intense. This usually happens close to the port, therefore in order to accurately get the radiation efficiency you need a fine mesh within the whole computation domain.

Hope this helps....
 

Generally, when talking about radiation efficiency, the loss due to inperfect impedance matching is excluded. In other words, the behavior of radiation efficiency has nothing to do with return loss (RL). Besides, I notice that the reference uses the term "antenna efficiency" instead of "radiation efficiency", you should check whether or not the matching loss is included there so as to make a fair comparison.

The whole behavior is different. Besides the efficiency is 100% for frequencies of worst return loss and low for frequencies of good RL !

Both my simulation and reference are attached.
THANK YOU
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top