Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

rph varies large than rnp

Status
Not open for further replies.

microwaver

Newbie level 6
Newbie level 6
Joined
May 10, 2008
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,381
Does high value poly resistor(large sheet resistor rph) process vary quite large than the small sheet poly(rnp)?I searched the PDK and did not find it,can anyone give me some explanation or reference?
 

The impurity concentration is more difficult to control at a lower level. The gate nonsilicide poly have about 50 times the doping. More stable.

Also the TC's are different. At low Rsq you have positive. RPH will have negative.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top