Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RGB lamp on Attiny2313

Status
Not open for further replies.

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


The project of the lamp was taken from LINK, where you can find schematic diagram and other useful attachments. There is no buttons in this project, because they do not look aesthetically. The housing was made of an old wooden box decorated in Decoupage method. Front window is matt from the inside and glossy from the outside.
The circuit was mounted at the top of the housing and the power supply (9V/0,5A transformer with a bridge, capacitors and stabilizer) at the bottom. Walls were overlaid with aluminum foil for the stronger reflectivity and light scattering.
Unfortunately, the camera falsifies the real colours and pictures show that the light is not equally distributed, but it looks really nice.

Pictures:



Link to original thread (useful attachment) – Ładna lampka RGB na ATtiny2313
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top