Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RF Impedance Tuner Circuit Design

Status
Not open for further replies.

ttkane

Newbie level 5
Joined
May 28, 2008
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,344
how can i design impedance tuner locate smith chart anywhere .
In addition to use Coaxial Line Stretcher module.

because my company did not have stretcher. so i hope it can achieve by circuit.


thanks
 

A line strecher puts in a physical delay, but is wideband, so the phase shift will increase as the frequency increases, but amplitude wise it is lossless. An impedance tuner will only work over a restricted bandwidth. So if you let us know what centre frequency you want and what sort of characteristics you want, perhaps some one here can help you.
Frank
 

Thanks For your reply,
my centre frequency is 2.4G and 5G.

it's any sort of circuit are no required.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top