Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] RF amplifier in Advanced Design Systems

Status
Not open for further replies.

hsshah

Junior Member level 2
Junior Member level 2
Joined
Feb 6, 2011
Messages
23
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,388
Hi,
I want to make a RF amplifier circuit in ADS at a frequency of 1800 MHz.
Could anyone please help me up with a schematic??
 

You can find some application note in say Avago, Macom, Maxim websites.
If you have problems, we can help you. But your work should be done by yourself.
 

Thanks a lot tony_lth but
Couldn't find any help
Actually i needed a schematic of a 1.8Ghz Power amplifier as i am doing a project in ADS on GSM Band Jammer Circuit.
So if anyone could help??
 

if you are using ADS. check the examples for the same. or else motorola MRF parts have schematic for 1.8GHz which you can draw yourself in ADS. you get the MRF part models also online for ADS.

---------- Post added at 12:33 ---------- Previous post was at 12:26 ----------

Also check Freescale.
 
  • Like
Reactions: hsshah

    hsshah

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top