mikal
Member level 1
- Joined
- Jun 5, 2006
- Messages
- 33
- Helped
- 2
- Reputation
- 4
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- Austin, TX
- Activity points
- 1,591
I'm currently setting up some automated tasks, and I'm in need of an orcad schematic that I can put through the pipe. It can be anything, but I do need 'most' of it needs to be complete (most importantly, PCB Footprints). Hopefully a least a couple pages long (not a small board). Also, schematic software rev. no greater than 10.1. (If you have better than 10.1, you can do a 'save as' to a lower revision).
I won't be building the board, but I simple need to test some things out on my end... so again, it can be anything. Once I'm done, I'll delete it (if that's any concern).
You can email the file to mwyb.orny@yahooDeletethisAndThatDotInFirstName.com
(have to get creative on email addy because of the dang bots out there).
I thank you greatly for you help.
-Mike
I won't be building the board, but I simple need to test some things out on my end... so again, it can be anything. Once I'm done, I'll delete it (if that's any concern).
You can email the file to mwyb.orny@yahooDeletethisAndThatDotInFirstName.com
(have to get creative on email addy because of the dang bots out there).
I thank you greatly for you help.
-Mike