Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] question about the MMU

Status
Not open for further replies.
X

xihushui

Member level 2
Joined
May 12, 2006
Messages
50
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
1,599
You know, when the user ask the MMU for address, the MMU give the user it if MMU have enough address. If the MMU give the user the same address for some reasom, eg, the MMU give user address addr1、 addr2、addr4、addr8、addr2，It's critical to the user.

the same question, the user maybe release the same address to the MMU.I want: 1、the MMU can check the same address,2、the MMU can discard the same address.

anybody have method the check the same address, MMU to user or user to MMU?

thank you
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top