Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Question about OVSF codes in UMTS

Status
Not open for further replies.

ahmed_nasr

Member level 3
Joined
Sep 19, 2006
Messages
59
Helped
11
Reputation
22
Reaction score
1
Trophy points
1,288
Activity points
1,694
ovsf umts

Hi folks ,

I know OVSF codes are used for channelization in UMTS , I'd like to know , in a normal voice call , is the same OVSF code used for uplink and downlink ?

Also in which channel are the OVSF codes assigned ? is it the FACH ?
 

ovsf uplink umts

ahmed_nasr said:
Hi folks ,

I know OVSF codes are used for channelization in UMTS , I'd like to know , in a normal voice call , is the same OVSF code used for uplink and downlink ?

Not necessarily

ahmed_nasr said:
Also in which channel are the OVSF codes assigned ? is it the FACH ?

I dont remember, you better read some book on UMTS
 

    ahmed_nasr

    Points: 2
    Helpful Answer Positive Rating
umts questionary

Communications_Engineer said:
ahmed_nasr said:
Hi folks ,

I know OVSF codes are used for channelization in UMTS , I'd like to know , in a normal voice call , is the same OVSF code used for uplink and downlink ?

Not necessarily

ahmed_nasr said:
Also in which channel are the OVSF codes assigned ? is it the FACH ?

I dont remember, you better read some book on UMTS

Thanks for the piece of info ... I read a few books on UMTS and couldnt find such an answer ... could you recommend me some usefool reference ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top