fathi
Junior Member level 1
I am simulating an amplifier using .pss in Sprectre. The output waveform has different amplitudes in different .pss runs.
These are the settings that I simulated with:
- errpreset (Accuracy): conservative
- tstab is long enough for the circuit to settle
- Integration method: default/gear2/gear2only
- maxperiods: default(20)/50
Any suggestion to get consistent results?
Thanks.
These are the settings that I simulated with:
- errpreset (Accuracy): conservative
- tstab is long enough for the circuit to settle
- Integration method: default/gear2/gear2only
- maxperiods: default(20)/50
Any suggestion to get consistent results?
Thanks.