Mithun_K_Das
Advanced Member level 3
- Joined
- Apr 24, 2010
- Messages
- 899
- Helped
- 24
- Reputation
- 48
- Reaction score
- 26
- Trophy points
- 1,318
- Location
- Dhaka, Bangladesh, Bangladesh
- Activity points
- 8,254
I'm using PIC for more than last 4yrs. But I didn't fetched any problem like this before.
Problem # 1: The ADC of PIC16F877A is calculating sometimes like 8bit, sometimes like 10bit. I don't know why. Even same program showing different result. Is this the problem of China Product?
Problem # 2: If I use One Digital input and others Analog, then the PIC16F877A will measure/calculate either the Analog one or the Digital one. Can't calculate both although both measurement have different time of measurement. Have 3000ms gap between two measurement.
Can anyone suggest me why this happen?
Problem # 1: The ADC of PIC16F877A is calculating sometimes like 8bit, sometimes like 10bit. I don't know why. Even same program showing different result. Is this the problem of China Product?
Problem # 2: If I use One Digital input and others Analog, then the PIC16F877A will measure/calculate either the Analog one or the Digital one. Can't calculate both although both measurement have different time of measurement. Have 3000ms gap between two measurement.
Can anyone suggest me why this happen?