nusliqiang
Junior Member level 2
icd0161
Hi,
Previousely, I design a circuit (5 pins and VDD, MCL isolated to supply during programming), and used ICD2 to ICSP program PIC16F877A, it is succesful.
I am using ICD2 to In-Circuit program the PIC24HJ64GP506 now (5 pins and VDD, MCL isolated to supply during programming), when I enter ICD 2, the "SUPPLY for ICD 5V" is not seletable. Does that because PIC24 use 3.3V not 5 V? But I also use 3.3V to my PIC16F877A which is succesfful.
The ICD 2 error msg is:
"...Reading ICD Product ID
Running ICD Self Test
... Failed Self Test. See ICD2 Settings (status tab) for details.
MPLAB ICD 2 Ready
"
Thanks and regards!
Hi,
Previousely, I design a circuit (5 pins and VDD, MCL isolated to supply during programming), and used ICD2 to ICSP program PIC16F877A, it is succesful.
I am using ICD2 to In-Circuit program the PIC24HJ64GP506 now (5 pins and VDD, MCL isolated to supply during programming), when I enter ICD 2, the "SUPPLY for ICD 5V" is not seletable. Does that because PIC24 use 3.3V not 5 V? But I also use 3.3V to my PIC16F877A which is succesfful.
The ICD 2 error msg is:
"...Reading ICD Product ID
Running ICD Self Test
... Failed Self Test. See ICD2 Settings (status tab) for details.
MPLAB ICD 2 Ready
"
Thanks and regards!