nanosmart
Newbie level 3
What is the best choice for fast switch-off in both AC and DC loads?
Conditions:
1-I want to design voltage and current protector circuit.
2-I prefer not to use the relay or ssr.
3-The load might work in both DC or AC.
4-The MAX RMS current is 10A.
5-The MAX RMS voltage is 400V.
6-The combination use of Power Electronic Devices is fine.
Conditions:
1-I want to design voltage and current protector circuit.
2-I prefer not to use the relay or ssr.
3-The load might work in both DC or AC.
4-The MAX RMS current is 10A.
5-The MAX RMS voltage is 400V.
6-The combination use of Power Electronic Devices is fine.