Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Power disipation comparisson between WC and BC libraries

Status
Not open for further replies.

shahal

Member level 2
Member level 2
Joined
Jan 11, 2007
Messages
50
Helped
7
Reputation
14
Reaction score
6
Trophy points
1,288
Activity points
1,638
Got a question. Would Power Dissipation numbers for a design with BC libraries be higher than WC libraries? I would tend to think yes., but I am not sure. Can some one please explain why? Thanks in advance
 

from my understanding, i think it would be the other way around with WC having more power dissipation than BC.
 

There are two component in any lib model to represent power dissipation,

i) First one is for static power which is higher in case of BC since it is proportional to V². V(Supply Voltage) is higher in case of BC.

ii) Second one is to consider dynamic power which is more in case of SS. This is because of comparatively bad transition...

I hope this will help :|
 

    shahal

    Points: 2
    Helpful Answer Positive Rating
maybe , the result is not so as you think. For example , in WC,a chip may not operation at high power supply and clock frequency maybe less than BC condition.thus the chip will consume less power than that in BC.
 

for example, one circuit can select cell from BC lib, all constraints are met. The same circuit selects cell from WC lib, all constraints are also met.

In previous condiction. the power dissipation of circuit which select cell from BC lib must be more than that of another one. Because the cell from BC lib will consume more capacitance, more area. you can find this from lib pdf file.


David
 

    shahal

    Points: 2
    Helpful Answer Positive Rating
Thanks for your comments guys. So from what I understand BestCase libraries should have more power consumption, which can be counter intutive if you go by name only. But if you go with the meaning, ie Best Case Libraries means faster chips, ie draws more power, it makse sense. This also corelates to Power Consumtion numbers I am seeing in Power Theater.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top