Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That would give output of -90dBm.very low input power about -120dBm and high gain about 30dB?
No, it must be 130dB.Well, with output power +10dBm do you mean that power gain have to be 110dB?
Right calculation but wrong formula.and therefore Rload from the formula Pout = Vdd^2/(2RLoad) is very very large about tens giga ohms.
Right calculation but wrong formula.
But load impedance for RF amplifiers will be usually 50 ohm, maybe 100 or 200 ohm in special cases.
For example, with 50 ohms load we can make it up to 10 Gohms with impedance transfomation network.