Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi , thanks
I am trying to use ISEL driver with direction and clock inputs
with 200/400 steps per revolution (no need for microstep),but must everything control with encoder too,so no missing movements at all.
The 1746-HSTP1 Stepper controller module is a single axis stepper controller. The 1746 stepper controller is a single slot module that is capable of operating with a wide variety of SLC 500 series processors. It can provide up to 250kHz pulse train output for micro-stepping applications.
The module works directly with compatible Allen-Bradley programmable controllers and encoders. Compatible SLC processors include the fixed units used with the 2-slot expansion rack, SLC 5/01, SLC 5/02, SLC 5/03 and SLC 5/04 modules. It is also compatible with larger PLC programmable controller systems via the 1747-ASB module interface.
Schneider PLC Premium is also compatible with stepper motor, with the module TSXCFY** More infos on **broken link removed**.
You ll be able to find the reference manuals to see if it fit with your application
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.