karan123
Member level 3
pic18f4520
ello,
I am new For PIC MICROCONTROLLER (PIC18F4520) Series.
I have successfully Write Program for Blink LED and Checked on
MPLAB Simulator.
Now I have to Check that with Actual Hardware.
I have Connected
C1 and C2 22 pF and X'Tal of 4.00 MHz
PIN 13 and 14 for Osc.
PIN 32 and 11 to VCC.
PIN 31 and 12 to GND.
RESET Switch ON PIN 1 with GND
LED CONNECTED ON PIN2 RA0.
I have successfully Program HEX file to PIC uC.
But Unable to Blink LED on Actual Hardware
Please Guide me How to Trouble shoot Above Problem?
Karan
ello,
I am new For PIC MICROCONTROLLER (PIC18F4520) Series.
I have successfully Write Program for Blink LED and Checked on
MPLAB Simulator.
Now I have to Check that with Actual Hardware.
I have Connected
C1 and C2 22 pF and X'Tal of 4.00 MHz
PIN 13 and 14 for Osc.
PIN 32 and 11 to VCC.
PIN 31 and 12 to GND.
RESET Switch ON PIN 1 with GND
LED CONNECTED ON PIN2 RA0.
I have successfully Program HEX file to PIC uC.
But Unable to Blink LED on Actual Hardware
Please Guide me How to Trouble shoot Above Problem?
Karan