Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

overview of "NMS"

Status
Not open for further replies.

rz56

Junior Member level 3
Joined
Feb 4, 2007
Messages
28
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,456
Hi all,
I want to know about Network Managment Systems.
an introduction to it and some typical projects can be very good.

Thx
RT.
 

NMS is a monitoring and control system of managed devices through a Management Protocol such as SNMP, RMON. Therefore it include
- Agent/MIB software installed in managed device
- Management PC which installed Network Management Application ( eg HP Openview or vender specific application)
- Common Management protocol
- Managed devices ( Routers , Servers ,Hosts, Radio Eqipments etc..)
- Access network

Therefore you can download a free or vendor specific application and then implement a network after you can manage your devices remotely using Managemnt software

Regards,
Isuranja
 

Such as SQL Server 2000, etc.
 

rz56 said:
I want to know about Network Managment Systems.

Network management system is controlling server for a network. e.g NMS for SDH system is used to monitor and control the nodes.



Naveed
 

Hi all,
I want to know about Network Managment Systems.
an introduction to it and some typical projects can be very good.

Thx
RT.

NMS stands for Network Management System and it is a combination of hardware and software used to monitor and administer a network.

You may want to look at link below for further details:

Difference between EMS and NMS | Vertical Horizons
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top