Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

opnet simulation error

Status
Not open for further replies.

prinav

Newbie level 4
Newbie level 4
Joined
Oct 8, 2011
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,352
i m new to opnet14.5. pls help with this error also tel what this means.....


<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless\dra_bkgnoise.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless\dra_closure.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless\dra_snr.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_ber.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_chanmatch.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_ecc.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_error.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_inoise.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_power.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_propdel.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_rxgroup.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Win32: unable to launch program with CreateProcess():
LINK /DUMP /SYMBOLS "C:\OPNET\14.5.A\models\std\wireless_lan\wlan_txdel.dev32.i0.ps.obj"

----
<<< Recoverable Error >>>
Object repository construction failed
due to errors encountered by the binder program (bind_so_msvc)
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_rebuild)
----
Errors reported by the binder program follow
(these messages have been saved in (C:\Documents and Settings\cisco\op_admin\tmp\bind_err_1516):
bind_so_msvc: Unable to execute bind program (Win32 error code: 2)

Check that Visual C++ has been installed correctly, and that

its BIN directory is included in the Path environment variable.


----
<<< Program Abort >>>
Error encountered rebuilding repository -- unable to proceed
T (0), EV (-), MOD (NONE), PROC (sim_load_repos_load)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top