Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

one antenna with dual band frequency

Status
Not open for further replies.
K

kyg

Member level 5
Joined
Dec 6, 2007
Messages
92
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,857
hi all,

anyone know how to increase the effficiency for WLAN and Bluetooth band for one antenna?

i already design the PIFA antenna to get dual band,however the efficiency for high band is too low.

freq used : 2.4-2.5GHz
5.15GHz, 5.35GHz and 5.85GHz

the device also have metal frame that material is magnesium. i think
that material cause my antenna for 5GHz become worse.

the problem is what ever i have done the efficiency for 5GHz (WLAN) is too low
so i hope anyone can help me give some idea or advice how to increase the efficiency performance for the antenna

rgds,
kyg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top