Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Noise analysis (flicker noise) of pico Ammeter readings

Status
Not open for further replies.

gajvakra

Newbie level 2
Newbie level 2
Joined
Aug 19, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
12
M given project to do noise analysis of pico ammeter ADC output. here the input is 1pA DC signal. for which i have nearly 100000 output samples. sampling rate is 3.5Kps. these readings have error percentage nearly 0.178%. So i need to do its noise analysis like i have to detect which types of noises it contain? separation of those noises and actual signal and their plots. frequency ranges of the noises etc. Initially i need to do this in matlab later in VHDL. i dont understand how to proceed.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top