Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

network configuration of a auto-negotiate switch

Status
Not open for further replies.
R

robismyname

Full Member level 6
Joined
Jan 17, 2008
Messages
390
Helped
11
Reputation
22
Reaction score
9
Trophy points
1,298
Location
Central Florida
Activity points
4,603
can i configure a port on a switch as auto-negotiate when the NIC on the PC it is cabled to is configured to 100 Mbps full-duplex? Is this a valid configuration?
 

Typically it doesn’t matter but I’ve seen a few issues with 100Mb nics and Gb switchports requiring setting them to 100Mb full-duplex.

Good Luck!!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top