Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Needs help for Quartus II 6.0 problem!

Status
Not open for further replies.
S

sora5563

Newbie level 5
Joined
Dec 13, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,402
critical warning: register will power up low

Im using quartus II 6.0 to simulate my circiut, but there is an
critical warning comes out and said that :
-----------------------------------------------------------
Critical Warning: Ignored Power-Up Level option on the following nodes --
nodes are set to power up low
Critical Warning: I/O cell "SPICMD_CU:MACpart2CU|S.opcode" will power-
up low
Critical Warning: I/O cell "DPU_SPICMD:MACpart2DPU|SlaveSPI:SPI|
slaveCU:CtrlSlave|y.idle" will power-up low
------------------------------------------------------------
what's these mean and can any legends here tells me the steps to solve
this problem!
thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top