Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

needed: simple radio schematics

Status
Not open for further replies.

{ antonio }

Newbie level 4
Joined
Aug 24, 2004
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
grapevine, Texas
Activity points
44
russian radio schematics

i am looking for simple radio schematics - everthing from airplane radio to cb radio to am radio to weather band. does anyone might have schematic that has all of these in one? heck i'll a schematic they are seperatedor individual as well. thanks in advance for any help. antonio.
 

Here are some usefull projects.
Perhaps they can help you.

Best regards
 

you can use rf module and encoder and decoder ics like as pt2262 and pt2272 to send and receive max 6 command circuite is very simple
 

you should too consider doppler effect in motion reciever!!!!it can was very dificult to desighn
 

ofcours doppler effect may be important when the speed of transmitter or receiver is very fast but in model airplane its no problem
we can calculate Δf
Δf=fv/c
for example f =433.92 MHz
c=3exp8 m/s
v=30 m/s=108 km/h
then Δf=433.92exp6*30/3exp8=43.392 Hz
in ppm its about 0.1 ppm
and freqency drift in ask mode and also deviation in fsk mode is very very bigger than this freqency shift
 

can we use simle module for example rfm12 to this goal????
 

yes you can use rfm12 for data comunication but you need to initial it by a microcounroler before using
for transmitter and receiver frequency deviation rx bw and...
in otherwise rf power of rfm12 is very low (less than 10dbm) then you can not use it for long rang
 

you should too consider doppler effect in motion reciever!!!!it can was very dificult to desighn
Do you plan a radio on a spaceship?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top