Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help for design DSP-core for wireless application,

Status
Not open for further replies.

dd2001

Full Member level 4
Full Member level 4
Joined
Apr 14, 2002
Messages
236
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
1,912
dsp wireless application

Does anabody have such experences in desinging DSP core, ie, 0.25um CMOS, what is the key between 8051 and generic DSP processor?
 

The key difference between a general purpose micro-controller and a DSP is that the DSP has specialized HW for performing numerical calculations. Such HW might be dedicated multipliers, multiple adders, division unit, butterfly unit (to speed FFT processing), etc.
Have a look at https://www.opencores.org/projects/ if you intended to design a DSP core.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top