Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Help For "Cooperative Communication"

Status
Not open for further replies.

s.asad114

Junior Member level 1
Joined
Jun 17, 2010
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
hyd pak
Activity points
1,398
Im Working on "Cooperative Communication In 4G" as my Thesis .
i have some confusion which i want to clear out. if any one can help me thn Please Reply so that i can post my Questions.
 

I also work on cooperative comm. ( not specifically on 4G). You can still post your questions
 

Good to see your reply
i have following Question
1)
i just simulate Amplify and forward protocol yet but i wonder to see my result ,the result get worst after relay rather getting better. And i found Beta (Amplifying Gain) making my result worst instead of improving . i m attaching the m file and their correspondence function file ,please correct me where i'm mistaking. i hope you know All the equations concern with AF.

2)
one more thing that disturb me is that How the AF protocol produce Good result in Fading Environment (Practical scenario)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top